Forums
| edc15c7 |
| MTX Electronics » Forums » Software » Fiat ECU Flasher |
|
|
<< Previous thread | Next thread >>
|
| Go to page 1 2 | |
Moderators: mtx-electronics |
| Author | Post | ||
| tarator |
| ||
| Posts: 7 | Hello, Tried to read jtd 110 marea with vagcom cable, but no luck. The errors are: Errore [ES1],....... Errore [ES2],....... Errore [SC2],....... And there is another Errore [RX4], on status-bar | ||
| Back to top | | ||
| mtx-electronics |
| ||
MTX Electronics | Does ecu identification work? | ||
| Back to top | | ||
| tarator |
| ||
| Posts: 7 | When "identificazione" is pressed the soft try to ""wakeup" ecu 3 times and then...Errore [ES2] nothing else. The vagcom cable is modified in order to be able to read airbag ecu. Could that be the problem | ||
| Back to top | | ||
| mtx-electronics |
| ||
| MTX Electronics | The ES2 error indicates that either there is no reply or the reply from the ecu is not correct. As for the vagcom cable modification if this airbag modification moved the K-LINE to another pin on the OBD connector this will be a problem. [ Edited Mon Jul 11 2011, 08:19pm ] | ||
| Back to top | | ||
| tarator |
| ||
| Posts: 7 | Tried without airbag mod, and it didn't work. | ||
| Back to top | | ||
| salvo |
| ||
 | I suspect that the problem is timing related. What OS are you using? | ||
| Back to top | | ||
| tarator |
| ||
| Posts: 7 | I'm using Win xp sp3. Port settings are 9600 bits per second and latency 1. | ||
| Back to top | | ||
| salvo |
| ||
| | My suspects were correct it is a timing issue. It seems that between different computer the timing routines are not constant. I am working having the software do a timing test to calibrate the timings on fist boot. Test systems: - 1Ghz Pentium 3 with OS WinXP SP2 - 3Ghz Athlon64 with OS WinXP SP3 | ||
| Back to top | | ||
| tarator |
| ||
| Posts: 7 | Is there something i can do? Change port settings for example | ||
| Back to top | | ||
| mtx-electronics |
| ||
| MTX Electronics | Unfortunatly you can not do anything yourself. I am actively working on the solution so you should see an update very soon that will resolve this. | ||
| Back to top | | ||
| Go to page 1 2 | |
