Forum

edc15c7
MTX Electronics » Forum » Software » Fiat ECU Flasher
 
Vai a pagina  1 2
Moderatori: mtx-electronics
Autore Messaggio
tarator
lun giu 27 2011, 12:54
messaggi: 7
Hello,
Tried to read jtd 110 marea with vagcom cable, but no luck.
The errors are:
Errore [ES1],.......
Errore [ES2],.......
Errore [SC2],.......
And there is another Errore [RX4], on status-bar
Torna ad inizio pagina
mtx-electronics
ven lug 08 2011, 06:44
MTX Electronics
messaggi: 45
Does ecu identification work?
Torna ad inizio pagina
tarator
ven lug 08 2011, 07:36
messaggi: 7
When "identificazione" is pressed the soft try to ""wakeup" ecu 3 times and then...Errore [ES2] nothing else.
The vagcom cable is modified in order to be able to read airbag ecu. Could that be the problem
Torna ad inizio pagina
mtx-electronics
lun lug 11 2011, 08:18
MTX Electronics
messaggi: 45
The ES2 error indicates that either there is no reply or the reply from the ecu is not correct. As for the vagcom cable modification if this airbag modification moved the K-LINE to another pin on the OBD connector this will be a problem.

[ Modificato lun lug 11 2011, 08:19 ]
Torna ad inizio pagina
tarator
lun lug 18 2011, 11:48
messaggi: 7
Tried without airbag mod, and it didn't work.
Torna ad inizio pagina
salvo
mer lug 20 2011, 03:53
messaggi: 19
I suspect that the problem is timing related. What OS are you using?
Torna ad inizio pagina
tarator
gio lug 21 2011, 10:51
messaggi: 7
I'm using Win xp sp3. Port settings are 9600 bits per second and latency 1.
Torna ad inizio pagina
salvo
dom lug 24 2011, 12:29
messaggi: 19
My suspects were correct it is a timing issue. It seems that between different computer the timing routines are not constant. I am working having the software do a timing test to calibrate the timings on fist boot.

Test systems:

- 1Ghz Pentium 3 with OS WinXP SP2
- 3Ghz Athlon64 with OS WinXP SP3
Torna ad inizio pagina
tarator
mar ago 02 2011, 05:19
messaggi: 7
Is there something i can do? Change port settings for example
Torna ad inizio pagina
mtx-electronics
mar ago 02 2011, 07:45
MTX Electronics
messaggi: 45
Unfortunatly you can not do anything yourself. I am actively working on the solution so you should see an update very soon that will resolve this.
Torna ad inizio pagina
Vai a pagina  1 2  

Salta:     Torna ad inizio pagina

RSS discussione: rss 0.92 RSS discussione: rss 2.0 RSS discussione: RDF