Forum
edc15c7 |
MTX Electronics » Forum » Software » Fiat ECU Flasher |
|
Vai a pagina 1 2 | |
Moderatori: mtx-electronics |
Autore | Messaggio | ||
tarator |
| ||
messaggi: 7 | Hello, Tried to read jtd 110 marea with vagcom cable, but no luck. The errors are: Errore [ES1],....... Errore [ES2],....... Errore [SC2],....... And there is another Errore [RX4], on status-bar | ||
Torna ad inizio pagina | | ||
mtx-electronics |
| ||
MTX Electronics messaggi: 45 | Does ecu identification work? | ||
Torna ad inizio pagina | | ||
tarator |
| ||
messaggi: 7 | When "identificazione" is pressed the soft try to ""wakeup" ecu 3 times and then...Errore [ES2] nothing else. The vagcom cable is modified in order to be able to read airbag ecu. Could that be the problem | ||
Torna ad inizio pagina | | ||
mtx-electronics |
| ||
MTX Electronics messaggi: 45 | The ES2 error indicates that either there is no reply or the reply from the ecu is not correct. As for the vagcom cable modification if this airbag modification moved the K-LINE to another pin on the OBD connector this will be a problem. [ Modificato lun lug 11 2011, 08:19 ] | ||
Torna ad inizio pagina | | ||
tarator |
| ||
messaggi: 7 | Tried without airbag mod, and it didn't work. | ||
Torna ad inizio pagina | | ||
salvo |
| ||
messaggi: 19 | I suspect that the problem is timing related. What OS are you using? | ||
Torna ad inizio pagina | | ||
tarator |
| ||
messaggi: 7 | I'm using Win xp sp3. Port settings are 9600 bits per second and latency 1. | ||
Torna ad inizio pagina | | ||
salvo |
| ||
messaggi: 19 | My suspects were correct it is a timing issue. It seems that between different computer the timing routines are not constant. I am working having the software do a timing test to calibrate the timings on fist boot. Test systems: - 1Ghz Pentium 3 with OS WinXP SP2 - 3Ghz Athlon64 with OS WinXP SP3 | ||
Torna ad inizio pagina | | ||
tarator |
| ||
messaggi: 7 | Is there something i can do? Change port settings for example | ||
Torna ad inizio pagina | | ||
mtx-electronics |
| ||
MTX Electronics messaggi: 45 | Unfortunatly you can not do anything yourself. I am actively working on the solution so you should see an update very soon that will resolve this. | ||
Torna ad inizio pagina | | ||
Vai a pagina 1 2 | |